Page 53 - EBC_US_MC_Catalog_Issue_402_2021
P. 53

EBCTBERCAHKNEICSACLLPUATGCEHSKITS
     CK/CKF SERIES CLUTCH KITS
These kits are a full engine set, measured to re-set the original “stack” height of the clutch. The plates are a moulded OEM style fiber bonded onto a steel backing. These plates are described as wet/dry which means they can handle some oil but are not exactly a wet clutch. See your owners manual on oil type and install instructions to avoid clutch burn up or slippage.
The upgraded CKF range are again a full OEM size replacement friction plate only clutch pack but use a higher heat resistant carbon fiber impregnated facing. Smear plates with drive case oil before install.
CSK SERIES CLUTCH SPRING KITS
CSK sets include either coiled springs or diaphragm springs where appropriate. Coil springs are spiral wound with 4 to 8 pieces per set, made from heat treated high carbon steel delivering the right tension for your bike. Diaphragm springs are dish shaped flat steel pressure rings.
SRC/SRK SERIES CLUTCH KITS
The SRC series clutch kits include a pack of plates lined with Kevlar® facings for better heat and wear resistance. Plates should be smeared with drive case oil before install.
The SRK kits include a full set of friction plates lined with a carbon fiber based facing for even higher heat specs and also include new steel separator plates and a set of uprated springs. hence a complete rebuild kit. Smear plates with drive case oil before install.
  CT CLUTCH REMOVAL TOOLS
Made in the UK, these laser cut clutch removal tools make clutch removal, loosening of the drive shaft bolts and re-tightening a breeze, without any fear of damage to your expensive clutch basket. Tools can be extended to create more leverage if required with any simple workshop tool or tube. EBC Brakes produce a clutch tool for almost every clutch plate design known.
 CAUTION - replacing a clutch kit requires skill, expertise and a good workshop, plus tools.
A small press and a spring compressor may be needed. If you are not familiar with these routines, use a competent dealer or visit www.fixmyhog.com as an example of how to guide you safely.
        HARLEY-DAVIDSON®
FLD 103 Switchback FLDE Deluxe
FXD Super Glide FXD Super Glide
FXD 35 35th Anniversary Super Glide
CK Series Moulded OEM style facings #
CK7008
CSK Spring Kit #
CSK915
SRC Series Kit #
SRC7013
SRK CT Series Tool Kit # #
DYNA
FLD Switchback 2012-2016
FXB Super Glide B80 1981-1982
FXD Super Glide 1995-1997
FXD Super Glide 2007-2010
CK7008
CK7008
TBA
CK7012
CK7008
CK7009
CK7008
CK7008
CSK916
CSK916
CSK236
CSK255
CSK917
TBA
CSK916
CSK915
SRC7012
SRC7013
TBA
SRC7018
SRC7011
SRC7019
SRC7012
SRC7013
SRK7012
SRK7013
TBA
SRK7018
SRK7011
SRK7019
SRK7012
SRK7013
CT703SP
CT703SP
CT704SP
CT703SP
CT701SP
CT703SP
CT703SP
  2012-2016 2018 1998-2003 2004-2005
2006
SRK7013
CT703SP
51
    Part numbers, prefixes, suffixes, photos and illustrations shown in this catalog are trademarks and/or copyrights of EBC Brakes or the trademark owner Freeman Automotive (UK) Ltd and use without express written permission of the owners is punishable by law.

























   51   52   53   54   55