Chris Bailey at Wiltshire

Chris Bailey completes round 4 of Enduroland Race XC at Wiltshire.

Chris uses EBC ATV & Dirt Sintered Pads for top performance.

Round 4 of Enduroland Race XC was held at a new venue in Wiltshire, an open fast track with a small wooded section just to slow it down. There were worries that EBC sponsored rider Chris Bailey would be at a disadvantage on a smaller capacity 150cc bike. The fast track seemingly suited larger machines.

Any fears were quickly put to rest though, as Chris pulled into 2nd place on the first corner. The track was dry and dusty, so it was difficult to follow another bike. But Chris pushed on, riding in 3rd by the end of the first lap, catching and passing some of the expert class.

Being on a smaller bike didn’t seem to cause Chris any problems. For the next few laps Chris pushed himself and the bike harder and harder to stay with the more powerful machines.

After a quick stop halfway to refuel, Chris managed to hold a good gap to the racers behind and maintained it until the chequered flag. He finished the race 1st in class and 3rd overall, his highest position to date.

Chris Bailey at Wiltshire
Chris Bailey at Wiltshire

Chris Bailey rides with these EBC Brakes products:

EBC ATV & Dirt Sintered Pads

EBC ATV Brake Pads Pack
For the ultimate durability EBC presents it’s “R” series high density ATV & Dirt Sintered Pads. A sintered copper material made in our own USA facility, the “R” Series of heavy duty ATV and moto-x pads have become an aftermarket standard offering high durability, high resistance to contamination by mud, water, sand and grit etc. offering reduced disc damage and long pad life.

Leave a Reply